Prior to the last 2.4.03 update, I was not a big fan of being able to stack scan missions, and then complete them all with a single scan. this was quick, but not too satisfying. However, since the update, I have noticed, what to me is a fairly major issue with these missions. It goes like this...
1. I take as many planetary scan missions to the same system as possible
2. After reaching the system, I scan, and then receive the mission location updates, and make note of the destinations such as LFT 1446 A7A or A3B etc.
3. I pick a close one, land, scan, kill if necessary, board the ship, and take off for the next one, and check the mission for completion. What happens then is strange
4. if I am to go to LFT 1446 A7A, then A7A is where I go. I complete the scan. However, it completes the mission to another location such as LFT 1446 A3B. This means the mission to A7A is not complete. I then pick a location such as A4C and go there, do the mission, and check the status. It shows that A4A is not completed, however it may be a mission to A5D or even A7A that is completed instead. If you only have a couple of missions stacked, this is not a problem. However, if you stack 19 missions, to a system like
LFT 1446, you may have as many as 10 or more possible planets to choose from, you end up blindly flying, hoping a building scan shows up when you get close to the planet, then make a note of which one was completed.
5. My point is simple. If I have one mission or 6 missions to LFT 1446 planet A7A, those are the ones that should be shown as completed when I scan and check progress. I have no problem leaving the planet and returning to the surface to complete the additional missions on the same planets. This is not what happens. The missions that show as A7A may be scattered from A3A to A7D even though they all show as A7A in transactions. You never really know what location will actually complete which mission.
Help, what am I missing here ?
Thanks JT
UPDATE: 11/16/17
I just completed 12 stacked missions to LFT 1446
A4C was the closest, so I went there first
4 were A4C but did not show up there, and had to be completed at A7A and A5A
1 was A5A but was completed at A7A
4 were A7A but were completed at A4C
2 were A7B but were completed at A4C
1 was A5B but was completed at A4C
I noticed that the missions completed in the order I accepted them without regard for the planet locations shown
7 were completed at A4C but none were showing A4C as the planet, and none of the A4C missions completed there
Maybe I am missing something here, please let me know if it is a bug, or am I doing in wrong
Steps to Reproduce
Just start game, accept missions, and play