If this doesn't do it!!

Community Support for the machines running the game
TorTorden
Dangerous
Dangerous
Posts: 3953
Joined: Mon Jun 01, 2015 11:13 am
CMDR: TorTorden
CMDR_Platform: None Specified
Contact:

Re: If this doesn't do it!!

Postby TorTorden » Thu Nov 09, 2017 7:42 pm

Pretty standard.

I have just activated the XMP profile for RAM so I get the 3200mhz.
This also activates an Multi Core Enhancement feature.
Intel specs say one core can boost to 4.7Ghz on loads, and this feature pretty much on any board featuring XMP, so all of them are the motherboard manufacturers saying "Screw that jizz, and clocks all cores to 4.7ghz" when boost mode is engaged.

As for clocking I hear these bad boys pretty much hit 5ghz with ease.

60c idle.
That sound really hot for a Ryzen doesn't it ?
Image

Hey I'm Thor -
People call me Bob.

Rule 1: Pillage. Then burn.
Rule 2: No such thing as overkill, as long as there are reloads.

TorTorden
Dangerous
Dangerous
Posts: 3953
Joined: Mon Jun 01, 2015 11:13 am
CMDR: TorTorden
CMDR_Platform: None Specified
Contact:

Re: If this doesn't do it!!

Postby TorTorden » Thu Nov 09, 2017 7:44 pm

Image

Hey I'm Thor -
People call me Bob.

Rule 1: Pillage. Then burn.
Rule 2: No such thing as overkill, as long as there are reloads.

TorTorden
Dangerous
Dangerous
Posts: 3953
Joined: Mon Jun 01, 2015 11:13 am
CMDR: TorTorden
CMDR_Platform: None Specified
Contact:

Re: If this doesn't do it!!

Postby TorTorden » Thu Nov 09, 2017 7:46 pm

Also I got my eyes crossed.
It was my ram voltage that was set to 1.35 the CPU is currently just running at 1.201 or some such.
Image

Hey I'm Thor -
People call me Bob.

Rule 1: Pillage. Then burn.
Rule 2: No such thing as overkill, as long as there are reloads.

User avatar
Cmdr Kharma
Dangerous
Dangerous
Posts: 3761
Joined: Thu Sep 18, 2014 7:28 pm
CMDR: Kharma
CMDR_Platform: PC-MAC
Contact:

Re: If this doesn't do it!!

Postby Cmdr Kharma » Thu Nov 09, 2017 8:01 pm

TorTorden wrote:60c idle.That sound really hot for a Ryzen doesn't it ?


Depends if this bios has the 20C offset or not.....

Depends if software used is reading correctly with or without the offset.......

At the moment the only thing that is impressing me about this board is the amount of USB ports available......

And I've nearly filled all them.......
Image

Tor.....Hold on.......Tor.......Wait a bit.....TOR will you stop fecking firing.......Ok......Tor I know a therapist that can help you....... :D My Cmdr also has small feet

TorTorden
Dangerous
Dangerous
Posts: 3953
Joined: Mon Jun 01, 2015 11:13 am
CMDR: TorTorden
CMDR_Platform: None Specified
Contact:

Re: If this doesn't do it!!

Postby TorTorden » Thu Nov 09, 2017 8:08 pm

Cmdr Kharma wrote:
TorTorden wrote:60c idle.That sound really hot for a Ryzen doesn't it ?


Depends if this bios has the 20C offset or not.....

Depends if software used is reading correctly with or without the offset.......

At the moment the only thing that is impressing me about this board is the amount of USB ports available......

And I've nearly filled all them.......


That's one thing that surprises me.

So few ports.
Luckily I had an Inatek usb 3.0 card sitting on the shelf.
Or a would have had to connect the rift and a sensor to the front panel.
Image

Hey I'm Thor -
People call me Bob.

Rule 1: Pillage. Then burn.
Rule 2: No such thing as overkill, as long as there are reloads.

TorTorden
Dangerous
Dangerous
Posts: 3953
Joined: Mon Jun 01, 2015 11:13 am
CMDR: TorTorden
CMDR_Platform: None Specified
Contact:

Re: If this doesn't do it!!

Postby TorTorden » Fri Nov 10, 2017 1:33 pm

https://youtu.be/3lXGR0VyQPk

I was actually seeing better performance last night.
But I also wasn't recording 1080@60p, on the NVENC encoder, so that alone is possible a 10% load on the GPU.
And It's fairly clear here that is the GPU that is occasionally triggering ASW ...

But for unlike the CPU we have graphics settings to adjust GPU demand.
Image

Hey I'm Thor -
People call me Bob.

Rule 1: Pillage. Then burn.
Rule 2: No such thing as overkill, as long as there are reloads.


Return to “Hardware and Technical”

Who is online

Users browsing this forum: No registered users and 3 guests

i